Products
ViewSelect Your Vehicle
ChangeSharing many of the strength related features of a Summit bar, including ARB’s five fold upswept and tapered wing profile, the Summit Sahara bar offers a different look without sacrificing practicality.
Like the Summit bar, the Summit Sahara bar also provides a solid platform for adding other accessories such as winches, driving lights and CB antennas.
Available either with or without the polished centre tube, as well as indicators and optional fog lights (LED or halogen), the Summit Sahara bar offers owners greater flexibility in creating their desired look.
The Summit bull bar incorporates two CB antenna brackets welded behind the top cross tube. Custom fit, clamp on brackets are also available for additional antenna mounting.
The Summit bull bar incorporates two CB antenna brackets welded behind the top cross tube. Custom fit, clamp on brackets are also available for additional antenna mounting.
60.3mm mandrel steel tubing provides increased frontal protection, as well offering greater visual styling to modern four-wheel-drive vehicles.
60.3mm mandrel steel tubing provides increased frontal protection, as well offering greater visual styling to modern four-wheel-drive vehicles.
A 30mm wing and center section edge radius offers increased strength while complementing modern vehicle design.
Exceptionally durable and secure, all ARB bull bars serve as an ideal platform to mount driving lights, helping ensure maximum performance and longevity. Driving lights mounted to a high-quality bull bar prevents problems such as excessive movement, a vibrating beam pattern, premature bulb failure and eventual fatiguing of the light bodies.
Press forming has been utilized to create a stronger center pan that features smooth, continuous edges. A press-formed aluminum winch cover panel finishes off the bull bar for when a winch is not installed.
Eliminating the need for a mounting bracket, jacking points are integrated into the design of Summit bull bars.
Mounting a winch to a vehicle requires a properly supported structure that is designed to accommodate the stresses of winching. When using a snatch block to increase winching capacity, the forces are multiplied to several times the rated capacity of the winch. The ARB Summit bull bar features the option of fitting a winch, and is designed and tested to endure and exceed such loads.
The wide, split-pan design enhances the strength of the bull bar, while providing the radiator and engine with a massive amount of air flow. An integrated winch clutch opening makes winch operation simple.
With an air bag equipped vehicle, it is essential that the vehicle's crush rate and air bag triggering are not altered when a bull bar is installed. ARB assesses each vehicle's frontal crush characteristics and replicates the crush rate into the design of each air bag compatible bull bar and its steel mounting system. This achieves maximum possible vehicle and passenger protection without affecting the crash pulse.
Perfect for driving in inclement weather, these fog lights provide a broad spread of light to illuminate the road ahead.
12 high intensity yellow LEDs and 4 white LEDs provide increased light output in all conditions.
Each bull bar upright is cut from a single sheet of steel and extends from the top tube through to the bull bar section and actually forms part of the bull bar to chassis mount. This process ensures the whole outer frame receives the maximum possible support. Wide, press formed cover straps are then welded onto each upright to ensure there are no exposed sharp edges.
Finished in a stealthy Integrit™ textured black powder coat, the Summit Sahara tube with Light Bar features 10x integrated 20” OSRAM LED lights to illuminate the road ahead in a variety of driving conditions.
The tube’s aluminium body and high-pressure die-cast aluminium end caps enable heat dissipation for added longevity to the LEDs, while a light tint added to the polycarbonate lens ensures a non-obtrusive look. Manufactured from extruded aluminium for superior strength, the light bar’s turned reflectors create a defined beamline that’s specifically designed as a spot/flood combination to complement the OE headlight light spread; providing up to 445m @ 1 Lux and up to 44m spread of light.
Uncover the gear as well as some tips and tricks you will need for your next adventure off grid! Read here!
View online or order a printed copy
Enter your email address to receive updates about our products and events as well as newsletters.