AR40 V2 INTENSITY LED LIGHT BAR

Engineered in Australia and manufactured in the United States using the same patented lens/reflector technology as ARB’s existing Intensity LED driving lights, the ARB Intensity V2 LED light bar utilises Hyperspot™ optics and advanced flood optics to intensify the light output of the 40 OSRAM LEDs (2 rows of 20) encased in a virtually indestructible polycarbonate lens and powder coated, extruded aluminium body with high-pressure die-cast end caps.

Note: Intensity AR40 V1 LED Light Bar featured in video.

Designed to integrate with the top tube of the bull bar, the AR40 V2’s extruded alloy housing wraps around the tube, providing a low-profile integration with the bar work to maximise airflow to the cooling system and reduce obstructions. Its unique tube clamp mounting system sits out of view and delivers incredible stability for off-road use, eliminating vibration while being adjustable so that it won’t interfere with aerial mounting tabs, leaving them free to be used for their intended function.

Performance is paramount, with a heat sink that has over 435,000 mm² of surface area, allowing the light bar to dissipate heat quickly and operate at optimum efficiency even when the vehicle is stationary or at low speed.

Integral to the design is a range of virtually indestructible, moulded polycarbonate covers, hard-coated for scratch and UV resistance and available in a range of colours to further enhance protection from the elements.

Read More

OSRAM LEDS WITH HYPERSPOT™ TECHNOLOGY

To provide an intense amount of light in all driving conditions, the AR40 Intensity V2 Light Bar utilises OSRAM Giant LEDs to produce up to 25,080 lumens of raw light output (AR40CV2). For a single AR40CV2 combo, this means a light throw of 926m @ 1Lux and 40m of spread across the front of the vehicle. Plus, the warmer colour temperature (5700K) assists driver comfort and reduces eye fatigue.

A refined optic used to focus and intensify the light output as well as drive the OSRAM LEDs a great distance down the road, the Hyperspot™ technology also maintains clarity in the beam and controls the beam pattern to the correct area without spilling into unnecessary areas.

Features

ARBIntensityLightBarV2_feature

Mounting Kits

Mounting kits are available to suit three different tube diameters and are designed specifically to fit ARB bull bar. Constructed from extruded aluminum, with stainless steel fasteners, the unique mounts provide a solid clamp between the light and the tube, minimizing vibration and movement. A pedestal mounting kit is also available for bull bar pan or roof mounting options.

Mounting Kits

Mounting kits are available to suit three different tube diameters and are designed specifically to fit ARB bull bar. Constructed from extruded aluminum, with stainless steel fasteners, the unique mounts provide a solid clamp between the light and the tube, minimizing vibration and movement. A pedestal mounting kit is also available for bull bar pan or roof mounting options.

Built to Last

Each Intensity LED light bar is built to last, featuring over/under voltage protection, integrated thermal management and protection against radio frequency and electromagnetic interference.

Body

Large, extruded aluminum body provides superior strength and acts as a heat sink to draw heat generated from the electronics away from the LED array, increasing the efficiency and life of the LEDs.

Polycarbonate Lens

Virtually indestructible, UV resistant polycarbonate lens provides protection against road debris.

Security

Each light is secured to the vehicle with unique ARB tamper-proof security fasteners. On the tube mounting kits, all fasteners are recessed within the clamp, further increasing security.

Advanced Sealing

A unique moulded rubber seal sits between the polycarbonate lens and cast aluminum body to create a watertight and dust proof seal, allowing the light to achieve an IP68 rating - meaning protection against dust ingress and submersion up to 3 meters.

End Caps

High-pressure cast aluminum end caps contains a Gore® breather, enabling expansion and contraction of internal air during temperature fluctuations, without allowing water or dust ingress.

Specifications

AR40 Diagram

AR40 BEAM LUX SPECIFICATIONS

AR40CV2-light-beam-graph

Bumper Mounting Kits

For an integrated fit to your vehicle, mounting kits are designed specifically for ARB bumpers and are available in three sizes to cater for different tube diameters. Each kit is manufactured from extruded aluminum and incorporates stainless steel fasteners.

Pedestal Mounting Kit

For increased versatility, an alternative to the bull bar mount is the pedestal mounting kit, enabling fitment to the pan of an ARB Bumper or a roof rack. All fasteners are manufactured from stainless steel, with mounting hardware manufactured from a combination of aluminum and steel.

Intensity Light Bar Covers

Manufactured from polycarbonate and hard coated for scratch and UV resistance, these covers will protect your Intensity light bar from the elements. Available in clear, amber, blue, red and solid black.

RHINO-RACK MOUNTING KIT

The AR40 Intensity roof rack mount bracket was introduced due to popular demand and utilises the AR40 hardware for the perfect fit. This mounting system provides a versatile option to suit the Rhino-Rack Pioneer® platform, tray, tradie & universal range.

The AR40 Rhino-Rack mount features 5mm powder coated steel brackets whilst being tilt-adjustable, lateral and longitudinal adjustable (not vertical adjustable).

AR40_RR_CONFIGS1
top