Products
ViewSelect Your Vehicle
ChangeFrom the factory, most new 4WD vehicles are tuned for comfort during on road driving. Once weight is added in the form of accessories, passengers and cargo, performance and reliability suffer, especially when road conditions deteriorate.
Old Man Emu provide quality, application specific aftermarket suspension that is designed to increase load carrying capability and improve both vehicle handling and comfort across all terrains. A range of options provides increased ground clearance to better tackle more challenging terrain, and unlike some other accessories, you’ll notice the benefits of a new suspension system every time you drive your vehicle.
Suspension systems, especially when referring to 4WDs, are extremely complex. Determining the right solution for each 4WD requires special attention to many factors, with weight being the most critical. Old Man Emu 4×4 suspension by ARB approaches this in a unique way.
Instead of offering a compilation of parts that have been chosen primarily to increase the vehicle’s ride height, OME 4×4 suspension provides a range
of tuned, matched and integrated systems, each offering optimum levels of comfort, load carrying capability and control characteristics.
The complete Old Man Emu suspension range incorporates more than just 4×4 shock absorbers and springs. At ARB, we take integration to the highest level with our own selection of bushes, U bolts, centre bolts, spring liners, trim packers and suspension fitting kits.
Designed, developed and tested entirely in-house by ARB’s team of Old Man Emu ride engineers, BP-51 shock absorbers are engineered for each vehicle and utilise existing suspension mounting locations.
Providing unrivaled comfort and control over all surfaces, the revolutionary internal bypass design ensures there are no exposed fluid transfer channels on the exterior of the shock. This results in a design that suits existing suspension setups and offers greater longevity.
A BP-51 suspension upgrade is available to suit your vehicle.
The GU Nissan Patrol Coil/Leaf Cab is a large utility vehicle with extremely good off road capabilities, frequently used for heavy duty commercial purposes and carrying heavy loads. With this in mind, OME engineers focussed on increasing ride height and wheel travel whilst controlling the heavy mass of the vehicle over the full range of travel.
Multiple front springs and a matching shock were developed to cater for differing vehicle setups, and front ride height increases of approximately 50mm were achieved. A front trim packer was developed to further fine tune front ride heights and a castor correction kit ensures factory steering geometry is maintained. To reduce steering vibration, an upgraded steering damper was also developed.
Rear ride height increases of approximately 50mm maintain the factory vehicle rake and a range of rear springs, with greasable shackles & pins, provide multiple options depending on the intended loads to be carried. An XL leaf has also been developed to assist with fine tuning the weight carrying capacity and an anti inversion kit is used when greasable shackles are not fitted.
Enter your email address to receive updates about our products and events as well as newsletters.