ARB Air Lockers

A relentless commitment to research and design, the use of quality materials, and an uncompromising approach to manufacturing have all contributed to the Air Locker’s success in over 100 countries worldwide.

Designed and manufactured in Australia, ARB Air Lockers will enhance the traction of your 4×4 in just about any terrain, whether it’s rock, clay, gravel, sand, snow or mud.

Now with a state-of-the-art two piece design available right across the range, forged gears for the ultimate in strength and durability, and an industry-leading five year warranty, ARB Air Lockers are better built and better backed than ever before.

 

Forged Gears

Strength, durability and resistance to fatigue in all Air Locker components is paramount. With phenomenal forces being applied to the side and pinion gears within the differential, ARB has invested heavily in the application of forged gears, typically found in heavy duty commercial, race and agricultural transmissions. When combined with ARB’s patented ‘timed gear’ design, the resulting strength of the whole assembly is amplified.

Two Piece Design

Housing this superior internal gear train in a two-piece case brings further benefits. Machining a case from two pieces instead of three results in a much higher dimensional accuracy of the finished assembly and has allowed ARB engineers to improve the design of other elements, resulting in a reduction of moving parts, increased strength and a more responsive activation.

Unrivalled Support

For total peace of mind, all ARB Air Lockers are backed by a comprehensive, five year, unlimited kilometre warranty. Coupled with ARB’s extensive domestic and international network of stores and distributors, you can be sure we’ll be there to support you in the unlikely event of an issue.

Air Locker Features

airlocker

Air Supply

At the flick of a dash-mounted switch, compressed air is delivered to the seal housing assembly via a nylon air line.

Air Supply

At the flick of a dash-mounted switch, compressed air is delivered to the seal housing assembly via a nylon air line.

Flange Cap Assembly

A billet-machined, alloy steel spider block supports the cross shafts, using the torque applied at each shaft to support the next shaft along.

Clutch Gear

ARB's patented locking system actually supports the side gear teeth, giving you more torque handling capability, exactly when you need it.

Bonded Seal

Steel reinforced, elastomer-bonded annular seal has been proven to handle 20,000+ cycles under the most extreme climatic temperatures on earth.

Two-Piece Design

Machining a case from two-pieces instead of three results in a much higher dimensional accuracy of the finished assembly and has allowed ARB Engineers to improve the design of other elements, resulting in a reduction of moving parts, increased strength and a more responsive activation.

Splined Side Gear

High-grade surface treatments, forged nickel alloy steel and ARB's patented timed locking system make this the most ‘lockable’ gear in the industry.

Wave Spring

Instead of a complex external actuator system to engage/disengage the lock, ARB Air Lockers® use up to 12 return springs to support the entire profile of the locking gear for a fast, positive and independent disengagement.

Spider Block

A billet-machined, alloy steel spider block supports the cross shafts, using the torque applied at each shaft to support the next shaft along.

Pinion Gear

Combining the strength of forged nickel alloy steel with redefined gear-tooth geometry, ARB has revolutionized locking differential gear design to yield structural advantages of up to 30% over commercially available high strength gears.

Cross Shaft Retaining Pin

Custom made, one-piece hardened retaining pins lock into the assembly using a tapered thread junction.

Forged Gears

With phenomenal forces being applied to the side and pinion gears within the differential, ARB has invested heavily in the application of forged gears, typically found in heavy-duty commercial, race and agricultural transmissions.

Diff Case

Fully machined, one-piece nodular iron diff carrier case offers the rigidy of a one-piece factory differential with twice the standard number of pinion gears to cope with the torque.

Long Cross Shaft

Alloy steels and performance surface technology make for a high-pressure running fit that can handle an enormous amount of punishment.

top