From the factory, most new 4WD vehicles are tuned for comfort during on road driving. Once weight is added in the form of accessories, passengers and cargo, performance and reliability suffer, especially when road conditions deteriorate.
Old Man Emu provide quality, application specific aftermarket suspension that is designed to increase load carrying capability and improve both vehicle handling and comfort across all terrains. A range of options provides increased ground clearance to better tackle more challenging terrain, and unlike some other accessories, you’ll notice the benefits of a new suspension system every time you drive your vehicle.
Suspension systems, especially when referring to 4WDs, are extremely complex. Determining the right solution for each 4WD requires special attention to many factors, with weight being the most critical. Old Man Emu 4×4 suspension by ARB approaches this in a unique way.
Instead of offering a compilation of parts that have been chosen primarily to increase the vehicle’s ride height, OME 4×4 suspension provides a range
of tuned, matched and integrated systems, each offering optimum levels of comfort, load carrying capability and control characteristics.
The complete Old Man Emu suspension range incorporates more than just 4×4 shock absorbers and springs. At ARB, we take integration to the highest level with our own selection of bushes, U bolts, centre bolts, spring liners, trim packers and suspension fitting kits.
The Land Rover Defender is a medium sized 4×4, known for its ruggedness, no nonsense approach and high level of capability off road. During development, OME engineers focussed their efforts on increasing off road ability further as well as improving load carrying capability, ride and handling.
As well as a range of springs and shocks, providing ride height increases of 30-40mm (approximately), a variety of other components were developed to provide a comprehensive solution.
These include an upgraded steering damper to reduce the effect of wheel vibration and increase steering feel, a caster correction kit to maintain factory steering geometry specifications and trim packers to aid in fine tuning front and rear ride heights. Due to driveline angles, it is necessary to modify or replace the front driveshaft with double Cardon joints in this model.
For further wheel travel and articulation, a long travel kit has been developed which achieves a ride height increase of 50mm (approximately). Numerous engineering hours have been spent in developing solutions to overcome geometry issues resulting from the increased lift and travel.
Enter your email address to receive updates about our products and events as well as newsletters.